9
EN
3 Remove the old
filter as shown.
4 Using the
groove,insert a new
original GoPure
filter.
m
Important
The filter slides in
only one way, do
not force it in. See
above.
5.2 How to restart GoPure car air purifier
after a filter replacement
m
Important
You must reset
the Philips GoPure
device after every
filter replacement.
To reset your device
after replacing
the filter:
1
Plug the device
into the power
supply and ensure
that it is turned off.
2 Touch and hold
the power button
over 3s until it
emits a sound, the
filter replacement
indicator is blinking
in red for 15s, filter
reset done once
indicator turns off.
3 Car air purifier
purifier operates in the
normal mode once
top cover is locked.
n
Important
For you safety,
GoPure car air
purifier will shut
down automatically
whenever you open
the top cover.
4 Repeat the above
steps if the filter
reset fails.
