10
EN
4 Update VIBE
VIBE is controlled by an internal program called
firmware. Newer versions of the firmware may
have been released after you have purchased
VIBE.
The software program called
Philips Songbird
can use your computer to check for firmware
updates that are available on the Internet.
Install
Philips Songbird
on your computer
(see chapter
Install software
) and follow the
instructions to update (see chapter
Manually
verify / update the firmware
).
Note
Your music files are not affected by a firmware
•
update.
Manually verify / update the
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect VIBE to the computer (see
section
Connect and charge
for
instructions).
3
On your computer, click
Start
>
Programs
>
Philips
>
Philips Songbird
to
launch the Philips Songbird application.
4
Click VIBE in the Player pane. Then, select
Tools
>
Check for updated firmware
in
the pop-up window.
»
Philips Songbird
checks for updates
and installs new firmware from the
Internet, if available.
5
Follow the on-screen instructions to
update the firmware of VIBE.
6
Wait until the update is completed, then
disconnect VIBE from the computer.
VIBE restarts after the firmware is
»
updated and is ready for use again.
