Philips GC4549, Руководство пользователя

Страница: 18 / 40

18
ENGLISH
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide
guarantee leaflet.
Troubleshooting
This chapter summarises the most common problems you
could encounter with the appliance. If you are unable to solve the
problem with the information below, visit
www.philips.com/
support
for a list of frequently asked questions or contact
the Consumer Care Centre in your country (see the wordwide
guarantee leaflet for contact details).
Problem Possible cause Solution
The iron does not
produce any steam. There is not enough water
in the tank. Fill the water tank.
The steam setting is set to
“steam off”.
Adjust the steam knob to or
setting.
Water droplets
drips onto the
garment during
ironing. You have used the steam
boost function too often
within a short period. Continue ironing in horizontal
position and wait a while before you
use the steam boost function again.
You have not closed the
water tank lid properly. Press the lid until you hear a ‘click’.
You have not insert
the Quick Calc Release
collector properly back to
the appliance. Stop ironing and let the iron cools
down for at least 1 hour. Take out
the Quick Calc Release collector.
Insert it back into the appliance and
ensure the collector is in-line with
the surface of the appliance. Push
down the calc collector lock (“click”).
If the Quick Calc release tray is
damaged, contact a consumer care
center in your country (see the
world wide guarantee leaflet for
contact details).
You have put a chemical
into the water tank. Rinse the water tank and do not put
any perfume or chemicals into the
water tank.