Philips GC3320, Руководство пользователя

Страница: 7 / 104

1 Make sure the appliance is unplugged.
2 Set the steam control to position 0 (= no steam) (Fig. 3).
3 Open the cap of the filling opening.
4 Tilt the iron backwards and fill the water tank with tap water up to the maximum level
with a filling cup. (Fig. 4)
Do not fill the tank beyond the MAX indication.
5 Close the cap of the filling opening (‘click’).
setting the temperature
1 Put the iron on its heel.
2 To set the required ironing temperature, turn the temperature dial to the appropriate
position (Fig. 5).
Check the laundry care label for the required ironing temperature:
1
Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)
1
Silk
2
Wool
3
Cotton, linen
If you do not know what kind or kinds of fabric an article is made of, determine the right ironing
temperature by ironing a part that will not be visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric to prevent shiny patches.
Avoid using the spray function to prevent stains. Start ironing the articles that require the lowest
ironing temperature, such as those made of synthetic fibres.
3 Put the mains plug in an earthed wall socket.
The amber temperature light goes on.
4 When the temperature light goes out, wait a while before you start to iron (Fig. 6).
The temperature light goes on from time to time during ironing.
using the appliance
Note:The iron may give off some smoke when you use it for the first time. This stops after a short while.
steam ironing
1 Make sure that there is enough water in the water tank.
2 Select the recommended ironing temperature (see chapter ‘Preparing for use’, section
‘Setting the temperature’).
3 Select the appropriate steam setting. Make sure that the steam setting you select is suitable
for the ironing temperature selected: (Fig. 7)
1 - 2 for moderate steam (temperature settings
2
to
3
)
3 - 4 for maximum steam (temperature settings
3
to MAX)
Note:The iron starts to steam as soon as it has reached the set temperature.
Note:If the selected ironing temperature is too low (MIN to
2
), water may drip from the soleplate (see
chapter ‘Features’, section ‘Drip stop’).
ironing without steam
1 Set the steam control to position 0 (= no steam) (Fig. 3).
2 Select the recommended ironing temperature (see chapter ‘Preparing for use’, section
‘Setting the temperature’).
-
-
-
-
,
-
-
EnGlish
7