16
Schedule radio-to-USB
record
Schedule radio recordings in advance and you can
listen to your favorite programs at your convenience.
Note
A recording is activated only in the standby mode.
•
The maximum length of a recording is 12 hours.
•
1
Ensure that you set the clock correctly.
2
Plug the USB device into the socket of
this unit.
3
Tune to a radio station.
4
Press to switch to standby mode.
5
Press and hold
SLEEP/TIMER
for more
than 2 seconds.
A prompt to select the source is displayed.
»
6
Press
TUNER
repeatedly to select FM or AM.
7
Press
USB RECORD
.
The start timer digits are displayed and
»
begin to blink.
8
Press
ALBUM +/-
/ to set the hour.
9
Press
TITLE+/-
/ to set the minute.
10
Press
SLEEP/TIMER
to confirm.
The end timer digits are displayed and
»
begin to blink.
11
Press
ALBUM +/-
/ to set the hour.
12
Press
TITLE+/-
/ to set the minute.
13
Press
SLEEP/TIMER
to confirm.
»
is displayed.
At the scheduled times, the recording
»
begins and ends automatically.
When the recording ends, the unit
»
switches to standby mode.
To deactivate or re-activate a record timer
1
In the standby mode, press
SLEEP/TIMER
repeatedly.
If the timer is activated,
»
is displayed.
If the timer is deactivated,
»
disappears.
8 USB record
Audio CD tracks, MP3 files, radio and audio
from external devices are recorded in .mp3
format, and WMA files are recorded in .wma
format.
The first time you record to USB, a folder
called ‘PHILIPS’ is automatically created in the
USB device. Each time you record to USB, the
recorded files are stored in a sub-folder in the
‘PHILIPS’ folder. Files and sub-folders are named
numerically in the order in which they are
created.
Record to USB
1
Plug the USB device into the socket of
this unit.
2
Prepare the source to record from.
Disc - Select the disc source and load
•
a disc. You can select a track from
which a recording starts.
Radio - Tune to a radio station.
•
MP3 LINK/AUX - Select the MP3
•
link/AUX source, then connect and
start to play an external device.
3
Press
USB RECORD
to start recording.
For discs, press
•
USB RECORD
repeatedly to select:
A
[REC ONE] (record one): the first/
current track is recorded.
B
[REC ALL] (record all): all tracks/the
remaining tracks are recorded.
Disc play starts automatically from the
»
beginning of the disc/the selected track,
and the recording starts.
To stop recording, press
»
.
Note
If the USB device does not have enough
•
memory to store the audio files, a message
about a full memory is displayed.
English
EN
FWM462_77_UM_V1.0.indd 16
6/9/2010 10:44:50 AM
