12
EN
Connect an iPod / iPhone
dock
With the connected iPod / iPhone dock, you
can charge or listen to music from your iPod /
iPhone through this unit.
&
Connect a dock (not supplied) to the
DOCK
socket on this unit.
Tip
&
@`@%
press
DOCK
to select the dock source.
Prepare the remote control
Note
&
Risk of explosion! Keep batteries away from heat,
*q! *
&
Danger of explosion if battery is incorrectly replaced.
=# $q =*
To replace the remote control battery:
1
Open the battery compartment.
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
$17(11$
)0
$0
'2&.
63($.(56
92/7$*(
6(/(&725
9
9
3&,1$8;
5
/
DOCKING
3
Close the battery compartment.
Note
&
If you are not going to use the remote control for a
long time, remove the batteries.
&
Do not use old and new or different types of batteries
in combination.
&
Batteries contain chemical substances, so they should
be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
2
Press
on the main unit to start
installation.
»
[AUTO] (auto) is displayed.
»
The unit automatically stores radio
# > > *
»
When all the available radio stations
%
is broadcast automatically.
Set clock
1
In the standby mode, press
CLOCK
to
activate the clock setting mode.
»
The 12 hour or 24 hour format is
displayed.
