Philips FWM377, Руководство пользователя

Страница: 9 / 35

English
9
AM ANTENNA
FM ANTENNA
AUX/CDR
R L
SPEAKERS 6
Ω
R
L
LOW CH
– +
HIGH CH
R
L
A
B
C
Preparations
Rear connections
The type plate is located at the rear of the
system.
A
Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to the
local power line voltage.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
– High voltage! Do not open.You run the
risk of getting an electric shock.
– The machine does not contain any user-
serviceable parts.
– Modification of the product could result
in hazardous radiation of EMC or other
unsafe operation.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it
(not available for all versions) .
B
Antennas Connection
Connect the supplied MW loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
MW Antenna
Fix the claw
to the slot
1
2
3
MW ANTENNA
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
AC power cord
Speaker
(right)
Speaker
(left)
FM antenna
MW antenna
pg001-034_FWM377_12_Eng 2007.2.4, 16:38 9