manualshive.com logo in svg

Philips FWM35/21, Руководство по обслуживанию

Поделиться
Скачать
Philips FWM35/21 Скачать руководство пользователя страница 51

10-2

The following steps have to be done when replacing the CD mechanism:

1. Disconnect flexfoil cable from the old CD drive

2. Put a paperclip on the flexfoil to short-circuit the contacts (fig.1)

3. Remove the old CD drive

4. Remove paperclip from the flexfoil and connect it to the new drive 

5. Position the new CD drive in its studs

6. Remove solder joint from the Laserunit

CHARGED CAPACITORS ON THE SERVO BOARD MAY DAMAGE THE CD DRIVE ELECTRONICS WHEN
CONNECTING A NEW CD MECHANISM. THAT´S WHY, BESIDES THE SAFETY MEASURES LIKE
• SWITCH OFF POWER SUPPLY
• ESD PROTECTION
ADDITIONAL ACTIONS MUST BE TAKEN BY THE REPAIR TECHNICIAN.

fig.1

Attention:

The laser diode of this CD drive is protected against ESD by a solder joint which shortcircuits the

laserdiode to ground.

For proper functionality of the CD drive this solder joint must be removed 

after

connection the drive to

the set. 

Emergency open

Service hints

In case of a Supply fault, the tray can be opened manually.

1. Remove the top cover of the set to get access to the Changer Module.

2. Turn gearwheel clockwise (as shown in picture below).

CAUTION

Содержание FWM35/21



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды