Philips FWD876, Руководство пользователя

Страница: 37 / 51

37
English
Manual preset programming
1
Press TUNER (BAND) repeatedly to select the
desired tuner band: FM or MW.
2
Press and hold
1
/
¡
on the system to
search a radio frequency.
3
Press PROG/ANGLE .
➜
“
PROG
” and “
P00
” will display.
4
Press
O
/
P
or numeric keys (0-9) to
select the desired preset number.
5
After selecting an address number, press
PROG/ANGLE again to store the radio
station.
●
Repeat steps 3-5 to store other preset radio
stations.
Note:
– If you attempt to store more than 40 preset
radio stations, “FULL” will be displayed.
Selecting a preset radio station
●
In tuner mode, press
O
/
P
or use the
numeric keys (0-9)
to select the desired
preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
Deleting a preset radio station
1
Press
O
or
P
to select the preset radio station
to be erased.
2
Press
7
on the system, “
DELETED
” appears on
the display.
➜
The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
●
Repeat steps 1-2 to erase other preset radio
stations.
Changing tuning grid
In some countries, the frequency step between
adjacent channels in the MW band is 9 kHz (10
kHz in some areas). The preset frequency step in
the factory is 9 kHz.
1
Plug the AC power cord.
2
Press TUNER to select MW mode.
3
Press and hold
9
on the system for more than 3
seconds.
➜
“
STEP XX
” appears.
Note:
– All preset stations will be lost and need to be
reprogrammed.
Tuner Operations
pg031-051-fwd876-58-Eng-b 2007.5.15, 9:54 37