Philips FWD872, Руководство пользователя

Страница: 34 / 47

34
English
Tape Operation/Recording
IMPORTANT!
–Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may
get jammed or may burst in the
mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
Tape playback
1
Press OPEN/CLOSE to open the tape deck
door.
2
Insert a recorded tape and close the tape door.
●
Load the tape with the open side down and the
full spool to the left.
3
Press TAPE/AUX on the system or on the
remote control repeatedly to select tape mode
4
Press
38
to start playback.
To stop playback
●
Press
7
.
Rewinding or forwarding fast when
playback is stopped
1
Press
1
or
¡
on the front panel
2
Press
7
when you reach the desired passage.
General information on
recording
●
If you don’t intend to record via the microphone,
unplug it to avoid unwanted recording source.
●
For recording, only use tape of IEC type I(normal
tape).
●
The recording level is set automatically, regardless
of the position of the Volume, Vocal, Key control
and so forth.
●
The type is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for seven seconds.
●
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
●
Press RECORD in Disc/USB, Tuner/AUX mode,
“
NO TAPE
” will display on the display if there is
no recordable tape in tape deck .
fwd872-98 UM v1.0 2007.12.10, 17:27 34