Philips FWD798/37, Руководство по обслуживанию

Страница: 17 / 60

3-1 3-1
DISMANTLING INSTRUCTIONS
Dismantling the DVD Module
Dismantling of the Cover Front Display
1) Loosen the 4 screws at top cover , 2 screws at slide Cover
and 4 screws at back panel as Figure 1 & 2.
1) Remove the Volume knobs as stated in Dismantling the Cover Front Display in Figure 7.
2) Loosen 2 screws at the bottom of front panel.
3) Remove the Cover Tray as shown in figure 4.
Dismantling the Main board
1) Release 7 screws 'E' to free the Main board from the back panel assembly as shown in Figure 8.
2) Loosen 1 screw 'F' at the side of the set as shown in Figure 9.
3) Release 2 screws ' G ' on the heat sink as shown in Figure 10.
2) Push the gear slowly towards the front as shown in figure
3 until the CDC tray starts to move out of the Front
Cabinet. The CDC tray is now disengaged and can be
pulled out completely.
Figure 1
A
Figure 2
Figure 3
4) Loosen the 2 screws at front of DVD loader as Figure 5.
5) Loosen the 2 screws at back of DVD loader as Figure 6.
Figure 5
Figure 6
+
Figure 4
Put out
Figure 7
E
Figure 8
Figure 9
F
Figure 10
G
PULL OUT PULL OUT