background image

Detailed playback features and additional functions are described in the

accompanying owner’s manual

Make sure your DVD system and TV are connected and turned on!

Plug & Play

1

Turn on the system.

AUTO INSTALL - PRESS PLAY

” will be displayed.

2

Press PLAY/PAUSE 

2;

 

on the system to start installation.

Playing a disc

3

Press DISC on the remote control.

4

Turn on the TV and select the correct Video In mode.

You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).

5

Press OPEN

0

CLOSE 

0

 on the front of the DVD system and load a disc, then press

the corresponding OPEN

0

CLOSE 

0

 again to close the disc tray.

Make sure the disc label is facing up. For double-sided discs, load the side you want to play face

down.

6

Playback will start automatically.

If a disc menu appears, use 

1

/

¡

/

5

/

4

 buttons on the remote to make the necessary selection,

then press OK to confirm.  Or, use the numeric keypad on the remote to select features.  Follow
the instructions given in the disc menu.

7

To stop playback, press STOP

 

9

.

Region Codes

DVDs  must be labeled for ALL regions or Region 5,
in order to play on this DVD system.

You should find the below accessories in the packaging box.

Audio cables

(white, red)

Component video cables

(red, blue, green)

MW loop

antenna

Composite video cable

(yellow)

AC power cable

FM wire antenna

5

ALL

AV N

I

 

 

 

FWD182 QUG_Eng

2006.4.14, 4:44 PM

2

Отзывы: