28
English
3139 115 21281
Notes:
– The tape counter will automatically set to zero
after detecting end of tape.
General Information on
Recording
●
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
●
For recording, use only tape of IEC type I
(normal tape).
●
The recording level is set automatically, regardless
of the position of the Volume, VAC, DSC and so
forth.
●
The tape is secured at both ends with leader
tape. At the beginning and end
of the tape, nothing will be
recorded for six to seven
seconds.
●
To prevent accidental recording,
break out the tab on the left
shoulder of the tape side you
want to protect.
●
If “
CHECK TAPE
” is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
Preparation for Recording
1
Press
TAPE
(TAPE 1•2) to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
VCD
– load the disc(s).
TUNER
– tune to the desired radio station.
TAPE
– load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX
– connect external equipment.
When recording is in progress
➜
starts flashing.
●
It is not possible to listen to another sources
except when dubbing tapes.
●
It is not possible to activate the timer function.
One Touch Recording/Recording
the mixed sound
1
Press
VCD
,
TUNER
or
AUX
to select the
source.
●
You can connect a microphone to record the
mixed sound in tape deck 2 (refer to “Karaoke -
Microphone Mixing”).
2
Start playback of the selected source.
3
Press
REC
to start recording.
To stop recording
●
Press
Ç
on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "
SELECT SOURCE
" will be displayed.
CD/VCD/MP3-CD Synchro
Recording
1
Press
VCD
to select the disc.
●
Press
í
or
ë
to select the desired track to
start recording.
●
You can programme the tracks in the order you
want them to be recorded (refer to “CD/VCD/
MP3-CD Operation - Programming the disc
tracks”).
2
Press
REC
to start recording.
➜
The disc will start playback automatically.
Tape Operation/Recording
pg 001-035/V795/21-Eng
4/16/02, 6:44 PM
28
