3139 116 19591 (ENG)
24
TIMER
SLEEP TIMER
Sleep
(only on remote control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1
Press
SLEEP
on the remote control
repeatedly to select a period of time.
™
The selections are as follows (time
in minutes):
60
™
45
™
30
™
15
™
OFF
™
60
…
™
"
SLEEP XX
" or "
OFF
" will be
displayed. "
XX
" is the time in
minutes.
2
When you reach the desired length
of time, stop pressing the
SLEEP
button.
™
After this amount of time passes,
the system will switch to the
standby mode.
To switch off the Sleep Timer
• Press
SLEEP
repeatedly until "
OFF
"
is displayed, or press the
STANDBY ON
button.
5
Press
CLOCK/TIMER
again to
store the setting.
™
The clock starts.
• To exit without storing the setting,
press
Ç
on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD,
TUNER, or TAPE 2 mode
automatically at a preset time. It can
serve as an alarm to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level until the volume level
before the set is switched to
standby mode.
1
Press and hold
CLOCK/TIMER
for
more than
two seconds
to select
timer mode.
™
"
AM 12
:
00
" or "
00
:
00
" or the
last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
™
The
TIMER
starts flashing.
™
The selected source is lit while
other available sources are
flashing.
2
Press
CD
,
TUNER
or
TAPE
to
select the desired source.
• Before selecting CD or TAPE, make
sure a CD or tape is loaded in the
CD tray or tape deck 2.
3
Press␣
à
or
á
on the system to
set the hour for the timer to start.
4
Press␣
í
or
ë
on the system to
set the minute for the timer to start.
5
Press
CLOCK/TIMER
to store the
start time.
™
The timer is now set.
™
The
TIMER
remains on the display.
• At the preset time, the timer will be
activated.
™
The selected source will be
played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the
last tuned frequency will be switched
on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead.
– If the source selected is TAPE, and if
the preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
– The timer will not activate if a recording
is in progress.
To switch off the TIMER
•
Press
TIMER ON/OFF
on the
remote control.
™
The timer is now switched off.
™
The display will show "
CANCEL
"
and the
TIMER
disappears.
To start the TIMER again
(for the
same preset time and source)
•
Press
TIMER ON/OFF
on the
remote control.
™
The timer is now on.
™
The
TIMER
appears on the display.
pg 01-28/C85/37-Eng
2/16/00, 9:03 AM
24
