Philips FW-C788/21, Руководство пользователя

Страница: 24 / 28

24
English
3139 115 21171
2
Press
CD
,
TUNER
or
TAPE
to select the
desired source.
●
Before setting the timer, make sure the music
source has been prepared.
CD – Load the disc(s). To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2.
3
Press
à
or
á
on the system repeatedly to set
the hour for the timer to start.
4
Press
í
or
ë
on the system repeatedly to set
the minute for the timer to start.
5
Press CLOCK•TIMER to store the start time.
➜
"
TIMER ON
" will be displayed and followed
by the set timer "
XX
:
XX
" and then the selected
source.
➜
TIMER
will remain on the display.
●
At the preset time, the selected source will play.
To exit without storing the setting
●
Press
Ç
on the system.
Notes:
– If CD is the selected source and it is not
available when the preset time is reached, Tuner
will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
To deactivate the TIMER
●
Press TIMER ON/OFF on the remote control.
➜
The display will show "
CANCEL
" and
TIMER
will disappear from the display.
To activate the TIMER
●
Press
TIMER ON/OFF
on the remote control.
➜
The last set timer information will be shown
for a few seconds and
TIMER
will appear on
the display.
Sleep Timer Setting
The sleep timer enables the system to switch to
Standby mode automatically within a preset
amount of time.
1
Press SLEEP on the remote control repeatedly
to select a preset amount of time.
➜
The selections are as follows (time in
minutes):
15
™
30
™
45
™
60
™
OFF
™
15
…
➜
"
SLEEP XX
" or "
OFF
" will be displayed. "
XX
"
is the time in minutes.
2
When you reach the desired length of time, stop
pressing the
SLEEP button.
➜
SLEEP
will appear on the display, except for
"
OFF
" mode.
➜
The Sleep Timer is now set. Before the
system switches to standby mode, a countdown
of 10 seconds will be displayed.
"
SLEEP 10
"
™
"
SLEEP 9
"....
™
"
SLEEP 1
"
™
"
SLEEP
"
While SLEEP mode is activated
To check the remaining length of time
●
Press SLEEP once .
To change the preset sleep timer
●
Press
SLEEP twice
.
➜
The display will show the remaining time
followed by the sequence of sleep timer options.
To deactivate the Sleep Timer
●
Press SLEEP repeatedly until "
OFF
" is displayed,
or press the
STANDBY ON
button.
Clock/Timer
pg 001-027/C788/21-Eng 12/11/01, 5:29 PM 24