3139 115 20111
19
English
Notes:
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME,
DBB, Incredible Surround, DSC or VEC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side that you want to protect.
– If "
CHECK TAPE
" is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 2.
1
Load a blank tape in tape deck 2.
2
Press
RECORD
to start recording.
™
The
REC
flag starts flashing.
3
Press
Ç
to stop recording.
Note:
– When you press RECORD while in TAPE
mode, "
SELECT SOURCE
" will be
displayed. One Touch Recording is not
possible in TAPE mode.
RECORDING
CD Synchro Start Recording
1
Load a blank tape into tape deck 2 and a
disc into a disc tray.
2
Press
CD
to select CD mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing
CD
(CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3
Press
RECORD
to start recording.
™
The
REC
flag starts flashing.
• CD will start playback automatically.
4
Press
Ç
to stop recording.
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1
Press
TAPE
( TAPE 1•2 ) to select tape
deck 2.
2
Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck 2
with full spool to the left.
3
Press
DUBBING
™
"
DUB
" with "
2
" scrolling right will be
displayed.
• Dubbing will start immediately.
™
The
REC
flag starts flashing.
4
Press
Ç
to stop dubbing.
Untitled-70
12/12/00, 6:47 PM
19
