Philips FW-C390, Руководство пользователя

Страница: 26 / 30

26
English
3140 115 xxxxx
Timer setting
The system can switch on to CD, TUNER, or
TAPE 2 mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
1
Press and hold
CLOCK•TIMER
for more than
two seconds
to select timer mode.
➜
"
AM 12
:
00
" or "
00
:
00
" or the last timer
setting starts flashing.
➜
TIMER
starts flashing.
➜
The selected source will be lighted while
other available sources are flashing.
2
Press CD , TUNER or TAPE to select the
desired source.
●
Before setting timer, make sure the music source
has been prepared.
CD – Load the disc(s). To start from a specific
track, make a programme (refer to “CD
Operation - Programming the disc tracks”).
TUNER – tune to the desired radio station.
TAPE
– load the prerecorded tape into tape
deck 2.
3
Press
à
or
á
on the system repeatedly to set
the hour for the timer to start.
4
Press
í
or
ë
on the system repeatedly to set
the minute for the timer to start.
5
Press
CLOCK•TIMER
to store the start time.
➜
TIMER
remains on the display.
●
At the preset time, the selected source will play.
To exit without storing the setting
●
Press
Ç
on the system.
Notes:
– When the preset time is reached and the
selected disc tray is empty, the next available disc
will be selected. If all the disc trays are not
available, Tuner will be selected automatically.
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
Deactivating the timer
1
Press and hold CLOCK • TIMER for more than
two seconds
.
2
Press
Ç
on the system to cancel the timer.
➜
"
OFF
" is displayed and the
TIMER
disappears.
Activating the timer (for the same preset
time and source)
1
Press and hold CLOCK • TIMER for more than
two seconds .
2
Press
CLOCK
•
TIMER
again to store.
➜
TIMER
is shown.
Clock/Timer