3139 116 19351
13
English
™
The CD carousel tray will rotate until
the inner tray is rotated out and is
ready for changing.
3
Press
OPEN•CLOSE
to close the CD
carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1
Press
í
or
ë
until the desired track
appears on the display.
2
Press
É
to start playback.
™
The selected track number and
elapsed playing time appear on the
display.
Selecting a desired track during
playback
• Press
í
or
ë
until the desired track
appears on the display.
™
The selected track number and
elapsed playing time appear on the
display.
• If you press
í
once it will skip to the
beginning of the current track and play
the track again.
Note:
– Pressing
í
during shuffling can only
skip to the beginning of the current
track.
Searching for a particular
passage during playback
• Press and hold
à
or
á
until the
desired passage is located.
™
The volume will be reduced.
• Play returns to normal when
à
or
á
is released.
Programming Tracks
Programming tracks of a loaded CD is
possible when playback is stopped. The
display will indicate the total tracks stored
in the program. Up to 40 tracks can be
stored in the memory in any order. When
40 tracks are stored and you attempt to
store another track, the display will show
“
PROGRAM FULL
”.
1
Load the desired discs in the disc trays.
2
Press
PROGRAM
to start programming.
™
The
PROG
flag starts flashing.
™
It will cancel any previously selected
repeat mode.
3
Press the
CD
(CD 1•2•3) or
DISC 1/2/3
button to select the disc.
4
Press
í
or
ë
to select the desired
track.
5
Press
PROGRAM
to store the track.
• Repeat steps
3
to
5
to store other discs
and tracks.
6
Press
Ç
once to end programming.
™
The total number of tracks
programmed and total playing time
appear on the display.
CD
Notes:
– If the total playing time is more than
“
99
:
59
“
or if one of the programmed
tracks has a number greater than 30,
then “
--
:
--
” appears on the display
instead of the total playing time.
– If the system is reading the discs,
programming is not possible,
“
READING
” will be displayed and
followed by ”
DISC X
”. ”
X
” is the
current read disc number.
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Reviewing the program
Reviewing of the program is possible only
when playback is stopped.
• Press
í
or
ë
repeatedly to review the
programmed tracks.
• Press
Ç
to exit review mode.
Playing the program
1
Press
É
to start program playback.
™
“
PLAY PROGRAM
” will be
displayed.
™
The track number and elapsed
playing time of the current track will
appear on the display.
• If you press
REPEAT
during program
playback, the current track or all
programmed tracks will be played
repeatedly.
™
“
TRACK
” or "
PROGRAM
" will be
displayed.
™
The
REP
and
PROG
flags appear on
the display.
2
Press
Ç
to stop program playback.
Notes:
– If you press any of the CD DIRECT PLAY
buttons, the system will play the
selected disc or track and the stored
program will be ignored temporarily. The
PROG display also will disappear
temporarily from the display. It will
reappear when playback of the selected
disc ends.
– REPEAT DISC mode will be cancelled
when program playback begins.
Erasing the program
(when
playback is stopped)
• Press
Ç
.
™
“
PROGRAM CLEARED
” will be
displayed.
Note:
– The program will be erased when the
system is disconnected from the power
supply or when the CD carousel tray is
opened.
pg 01-24/C30/21&/30-En
3/3/00, 4:23 PM
13
