Philips Fisio 620, Руководство пользователя

Страница: 77 / 88

75
Other
operator
services
conference (see below). This service is limited to two current communications
(one active and one on hold).
Conference Call (Subscription dependent)
You can activate the conference call by making consecutive outgoing calls, or
create it from a multiparty call context. You may have up to five members at the
same time and end the conference with
)
. At this point all calls are
disconnected.
In order to make consecutive outgoing calls, first initiate a normal call with the
first number of the conference. When the first member is on line, initiate a
second call as described in “Make a second call” above. When the second call
is engaged, press
,
and select Conference . Repeat the above process until five
members are connected.
If there is an incoming call during the conference call, and if there is less than
five members, you can accept this new call by pressing
,
. Press
,
again and
then select Conference to add this member to the conference call. If there is an
incoming call during a conference with five members already connected, you
can answer this new incoming call, but not add it to the conference.
Explicit Call Transfer (Subscription dependent)
You can connect an active call and a call on hold. You are disconnected when
the transfer is completed. During a call press
,
, select Transfer and press
,
.
L
This feature is different from the Call forward, which takes place before you pick
up the call (see page 30).
In-call symbols
During calls, the following symbols can be displayed:
Conference
Mute
i
Incoming call Call underway
Active call placed
on hold
o
Outgoing call
Fisio620_GB_4311 255 53481.book Page 75 Jeudi, 28. février 2002 1:26 13