Philips Fidelio DCW8010, Руководство пользователя

Страница: 18 / 44

19 EN
Tip
(
~ |}~ ! WPS
button for Wi-Fi connection or enable the WPS PBC
&
&
(
If the WIFI SETUP indicator on DCW8010 stays
! |}~ &
Please wait for 2 minutes and try again. If the problem
! |}~ !&
(
H |}~
! &
Method 3: Connect to a non-
WPS router
To connect this system to a non-WPS Wi-Fi
router with a PC/Mac or iOS 4.3 iPod touch/
<Q< ! "}
"
Wi-Fi settings.
Follow the steps below to complete the
connection.
1
Collect settings of your home Wi-Fi
router and write down on paper for use
(see 'Collect settings of your home Wi-Fi
router' on page 19).
2
Make sure this system is in Assisted Wi-Fi
Setup mode (the light in the middle of
WIFI SETUP button stays solid yellow). If
! , |}~
Setup mode (see 'Switch this system to
Assisted Wi-Fi Setup mode' on page 20).
»
A new Wi-Fi network is created by this
! XHZ
of
Philips DCW8010 XXXXXX .
3
Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily
(see 'Connect your Wi-Fi enabled device
to the newly created Wi-Fi network' on
page 20).
4
Open the built-in web page of this system
with the internet browser of your Wi-Fi
enabled device (see ‘Open the built-in web
page of this system’ on page 22).
5
Change the internal Wi-Fi settings of this
system based on the settings that you
wrote down on paper at step 1 (see
‘Change the internal Wi-Fi settings of this
system’ on page 23).
6
Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
‘Restore your Wi-Fi enabled device back to
your existing home Wi-Fi setting’ on page
24).
Collect settings of your home Wi-Fi
router
Note
(
Always consult the user manual of your home Wi-Fi
router for detailed instructions.
1
Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
2
G H " X =
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
3
^ !
home Wi-Fi router.
4
Find the Wi-Fi settings tab and write down
the following information on paper:
A
Network name (SSID)
B
|}~ ! X! |?<
WPA or WPA2 if enabled)
C
Wi-Fi password (if Wi-Fi security is
enabled)
D
DHCP mode (enabled or disabled)
E
Static IP address settings (if DHCP
mode is disabled)