Philips Fidelio AW3000, Руководство пользователя

Страница: 11 / 57

9
English
EN
4 Connect AW3000
to your home Wi-
Fi network
To connect AW3000 to your existing home Wi-
Fi network, you need to apply your home Wi-Fi
settings to AW3000.
Choose your best setup method based on the
preconditions listed below.
Platform
of your
mobile
device
Type
of your
Wi-Fi
router
Other
require-
ment
Setup method
iOS Non-
WPS
No Choose option
1 (see 'Option
1: Set up wire-
less connection
to a non-WPS
router through
an iOS device'
on page 9).
Android Non-
WPS
No Choose option
2 (see 'Op-
tion 2: Set
up through a
non-WPS Wi-Fi
router and
Android device'
on page 12).
Either
iOS or
Android
WPS No Choose option
3 (see 'Option 3:
Set up wireless
connection to a
WPS router' on
page 13).
Either
iOS or
Android
Either
non-
WPS
or
WPS
You have
an Ether-
net cable.
Choose option
4 (see 'Option
4: Set up wired
connection
through an
Ethernet cable'
on page 15).
Before connection of AW3000 to your home
Wi-Fi network, make sure that:
a
your Wi-Fi router is powered on and
working properly.
b
AW3000 has been powered on and
booted up successfully (see 'Connect
power and switch on' on page 7).
c
you have jotted down your Wi-Fi
password.
Once connected successfully, AW3000 will
remember your home Wi-Fi settings. Then you
can play music or listen to Internet radio via
Philips Ai Lite whenever AW3000 is
powered on and connected to your home Wi-
Fi network automatically.
Option 1: Set up wireless
connection to a non-WPS
router through an iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
Select
Standard setup
and tap
Next
.