16
EN
»
After a while, the indicator on the back
of AD7050W turns solid green, and
the unit beeps.
»
AD7050W is connected to your
existing home Wi-Fi network
successfully.
Note
•
If the
WI-FI SETUP
indicator on AD7050W does not
turn solid green, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and AD7050W and then power on them again to see
whether AD7050W can be connected to your home
Wi-Fi network. If the problem remains, try the above
procedures again.
•
After you finish the above changes or power-off and
power-on of AD7050W, the new Wi-Fi network
created by AD7050W will disappear.
Tip
•
If you like, you can change the name of your AD7050W
in
Advanced settings -> AirPlay Device Name
on the
AD7050W configuration web page. This is helpful when
you have multiple Philips AirPlay-enabled devices in
your house and you need to distinguish between them.
•
If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), go to
Advanced settings -> CONFIGURE MANUALLY
on
the AD7050W configuration web page.
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
setting
Note
•
Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1
Select
Settings -> Wi-Fi
on your iPod
touch/iPhone/iPad.
•
Or open the list of available Wi-Fi
networks on your PC/Mac.
