Philips FC9060, Руководство пользователя

Страница: 9 / 20

setting the fragrance level
1 To set the fragrance level, turn the cartridge forwards (maximum emission) or backwards
(minimum emission) (Fig. 1).
Close the cartridge when you store the vacuum cleaner or do not want any fragrance to be
emitted. Turn the cartridge backwards until the openings of the cartridge are no longer
visible.
storage
1 Switch off the appliance and remove the mains plug from the wall socket.
Press the cord rewind button to rewind the mains cord (Fig. ).
Put the appliance in upright position and insert the ridge on the nozzle into the slot to attach
the nozzle to the appliance (Fig. 23).
Always put the Tri-Active nozzle in the carpet setting when you store it. Also prevent the side
brushes from becoming bent (Fig. 9).
Replacing/emptying the dustbag
Always unplug the appliance before you replace or empty the dustbag,
Replacing the paper dustbag
Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the floor (Fig. 24).
1 Pull at the release tab to open the dustbag compartment cover (Fig. 25).
Lift the dustbag holder out of the appliance (Fig. 6).
Make sure you hold the dustbag upright when you lift it out of the appliance.
Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 27).
When you do this, the dustbag is sealed automatically.
Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as
far as possible (Fig. 28).
5 Reinsert the dustbag holder into the vacuum cleaner (Fig. 29).
If you have not inserted a dustbag, you cannot close the dustbag compartment cover.
Cleaning/replacing filters
Always unplug the appliance before you clean or replace the filters.
Cleaning the Motor Protection Filter
Clean the Permanent Motor Protection Filter every time you replace the dustbag.
1 Remove the dustbag holder with the dustbag (Fig. 26).
Take the Motor Protection Filter holder out of the appliance and shake it over a
dustbin (Fig. 0).
Put the clean filter back into the filter holder. Fit the two lugs of the filter holder behind the
ridge at the bottom to ensure that it fits properly at the top. Then press the filter holder
home (‘click’) (Fig. 1).
Place the dustbag holder with the dustbag back into the appliance.
-
,
English
9