Philips Faro M770 Скачать руководство пользователя страница 48

Страница: 48 / 51

Bad audio (crackles, echo, etc.).

•

The handset is nearly out of range.
Move it closer to the base station.

•

The phone receives interference
from the nearby electrical
appliances. Move the base station
away from them.

•

The phone is at a location with thick
walls. Move the base away from
them.

•

The phone receives interference
from the DSL (digital subscriber
line) connection. Install a DSL filter
to prevent the noise. Contact your
service provider for the DSL filter.

The handset does not ring.

•

Make sure the handset ringtone is
turned on.

•

Make sure the handset is registered
to the base station.

The caller ID does not display.

•

The service is not activated. Check
with your service provider.

•

The caller's information is withheld
or unavailable.

Note

•

If the above solutions do not help,
disconnect the power supply from both the
handset and base station. Try again after 1
minute.

Содержание Faro M770




















































Результаты поиска

Содержание Faro M770

Отзывы:

Бренды по названию

Популярные бренды

Philips Faro M770, Расширенная пользовательская документация

Результаты поиска

Содержание Faro M770

Отзывы:

Бренды по названию

Популярные бренды