INSTALLATION INSTRUCTIONS
F Series Floodlight
© 2016 Philips Lighting Holding B.V. All rights reserved.
www.philips.com/luminaires
Part Number 443561002550 Rev. F
Page
1
of
7
IMPORTANT
:
Read carefully before installing. All
work should be performed by a qualified
Electrician. These instructions may not
provide directions to cover every
variation and detail. To obtain
additional information, consult your
vendor or contact the factory directly for
assistance before attempting anything
with uncertainty. Improper installation
and/or
utilization
may
void
manufacturer’s warranty.
This fixture must be grounded in
accordance with local codes and the
NATIONAL
ELECTRIC
CODE.
Failure to do so may result in serious
personal injury. HID luminaires should
be operated on grounded systems only.
Ungrounded power distribution systems
may carry high transient voltages which
can cause failure of any type electrical
equipment. Use of this equipment on
ungrounded systems will VOID THE
WARRANTY.
GENERAL:
Upon receipt, inspect for any freight
damage, which should be brought to the
attention of the delivering carrier. See
“Damage and Shortage Claims” for
proper steps in filing claims with the
carrier. Compare the catalog description
listed on the packing slip with the label
on the carton to assure you have received
the correct material.
This floodlight is designed for outdoor
lighting and should not be used in areas
with limited ventilation or within
enclosures
having
high
ambient
temperatures. It is provided with an
integral mastfitter for mounting on a
vertical 2-3/8” OD tenon x 4-1/2” tall.
The flood light is UL listed for wet
locations (UL1598) and may be aimed
above horizontal.
WARNING: In no case mount this
floodlight to either a horizontal tenon
or inverted tenon.
IMPORTANT: The flood light optical
assembly are separately packaged.
After uncartoning, inspect for any
damage. If damage is noticed, see
“Damage and Shortage Claims Form”
(yellow) for proper steps in filing
claims with the carrier.
NOTE: Illustrations depict a 400 watt
fixture. Assembly and installation
procedures are the same for 1000 watt
and 1500 watt fixtures.
