Philips Expanium AZ 5150, Руководство пользователя, Страница: 16 / 20

CASSETTE RECORDER
16
English
1. Set the source selector to TAPE/
POWER OFF
.
2. Press STOP•OPEN
9 /
to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY
1
and playback will start.
– The POWER indicator lights up.
5. Adjust the sound using the VOLUME and DBB controls.
6. For brief interruptions, press PAUSE
;
. Press PAUSE
;
again to
resume playback.
7. By pressing
5
or
6
,fast winding of the tape is possible in both
directions.
8. To stop playback, press STOP•OPEN
9 /
™
The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/
POWER OFF
position (with the
cassette keys are released) to switch off the set.
– The POWER indicator goes out.
General information on cassette recording
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC
II
)
or METAL (IEC
IV
) type cassettes. For recording you should
use NORMAL type cassettes (IEC
I
) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to
aviod jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME
and DBB controls will not affect the recording in progress.
• No recording will take place during the 7 seconds, when the
leader tape passes the recorder heads.
• To prevent the accidental erasure of a recording, keep the
cassette side to be safeguarded in front of you and break out
the left tab. Recording on this side is no longer possible.
1
CASSETTE RECORDING
RECOR
D
PLAY
SEARCH
STOP-OPEN
PAUSE
PROG
SHUFFLE
POWER
VOLUME
DBB
DYNAMIC BASS BOOS
T
CASSETTE PLAYBACK
AZ 5150
page
16
AZ5150/01 eng 02/20/02 16:53 Page 16