English
CONTROLS
CONTROLS ( see figure
1
)
1
4.5V DC ................ jack for AC/DC adapter power supply
2
EXT BATT ............ jack for external battery supply
3
LOCK
•
UNLOCK... locks/ unlocks all buttons on the set only
4
p
/LINE OUT ........ connect the remote control here and your headphones to
the remote control.
5
2;
........................ switches the player on, starts or pauses CD play; stops CD
play, clears a program or switches the player off. Press
and hold
2;
for 2 seconds to enter stop mode.
6
.................... switches radio on/off.
7
∞
/
§
................. skips and searches CD tracks backwards/ forwards
............................ (FM) tunes to stations
8
••
ç
••............ opens the CD lid
9
VOLUME
+
,
-
...... adjusts the volume.
0
rechargeable battery compartment
............. inside the CD player.
The model & serial numbers are located inside the battery compartment.
Supplied Accessories:
1 x headphones HE570
2 x rechargeable batteries, AY3365
1 x external battery case, AY3380
1 x remote control, AY3786
1 x AC/ DC adapter, AY3170
1 x CD-ROM with free Musicmatch Jukebox software
1 x pouch, AY3268
REMOTE CONTROL AY3786
CONTROLS ( see figure
2
)
1
p
........................ 3.5 mm headphone jack.
2
Clip
3
LOCK•OFF
......... locks/ unlocks all buttons on the remote control only.
4
∞
/
§
............... skips and searches backward/ forward tracks;
........................... (FM) tunes to stations
2;
...................... switches the player on, starts or pauses CD play; stops CD
play, clears a program or switches the player off. Press and
hold
2;
for 2 seconds to enter stop mode.
ALBUM
+
/
-
..... MP3/WMA-CD only :
–
selects the previous or next album
–
skips backward or forward
5
VOLUME
+
/
-
.... adjusts the volume
6
DBB
................... switches the bass enhancement on and off
7
PROG
.................
–
programs tracks;
–
programs FM station presets.
8
MODE
................ selects playback options;
........................... to select and enter the display function, press and hold
MODE for 3 seconds.
9
Display
0
FM
...................... switches radio on/ off.
Using the remote control
The remote control allows you to command all the functions on the player.
1
Firmly connect the remote control to
p
/ LINE OUT on the set.
2
Firmly connect the headphones to the jack
p
on the remote control.
3
On the remote control press and hold
2;
to start playback.
➜
playback starts and the track number is displayed for CD Audio. Filename
is displayed for MP3/ WMA CDs.
4
Adjust the volume and sound on your remote control.
Helpful Hint:
Replace the batteries as soon as
is displayed.
The display backlight only lights up if you are operating the controls on the
remote control.
BATTERIES
(supplied or optionally available)
You can use the following batteries with this CD-player:
◆
Normal batteries type
LR6
,
UM3
or
AA
,
◆
Alkaline batteries type
LR6
,
UM3
or
AA
(preferably Philips)
• PHILIPS rechargeable batteries, type AY3365
Helpful Hint:
– Old and new batteries should not be combined.
– Remove batteries in the order (
1
,
2
,
3
) as shown if
they are empty or if the player is not going to be used
for a long time.
◆
For battery case only
Inserting rechargable batteries
1
Push ••
ç
•• to open the CD lid.
2
Open the battery compartment (inside the CD player) and insert 2 x PHILIPS
rechargeable batteries, type AY3365.
Battery indication
The approximate power level of your batteries is shown in the remote control display.
Battery full
Battery two-thirds full
Battery one-third full
Battery low or empty. When the batteries are low,
flashes, and the
beep tone sounds repeatedly.
Batteries contain chemical substances, so they should be disposed
of properly.
Recharging the ECO-PLUS NiMH battery on board
Recharging works only on players supplied with the rechargeable ECO-PLUS
NiMH battery AY3365.
1
Insert the rechargeable ECO-PLUS NiMH battery AY3365.
2
Connect the power adapter to the 4.5V DC jack of the player and then to the
wall outlet.
➜
Charging
appears.
• Recharging stops after a maximum of 7 hours, or when you start playback.
3
When the battery is fully recharged,
and
Batt Full
appears in the dis-
play.
Helpful Hint:
– It is normal for the batteries to become warm during recharging.
– If the batteries become too warm, recharging will be interrupted for
approximately 30 minutes.
– To ensure proper recharging on board, take care that contacts are clean.
– Use only the ECO-PLUS NiMH battery AY3365.
Handling instructions
• Recharging already charged or half-charged batteries will shorten their
lifetime. We therefore recommend that you let the rechargeable ECO-PLUS
NiMH battery run till it is completely empty before you recharge it.
• To avoid a short circuit, do not let the battery touch any metal object.
• If the battery becomes empty soon after recharging, then either its contacts
are dirty or it has reached the end of its lifetime.
