Philips EXP320, Руководство по обслуживанию

Страница: 7 / 27

1-6
FEATURES
Playing tracks repeatedly or in random order-MODE
1 Press MODE repeatedly during playback to select either:
– shuffle all : All tracks of the disc are played in
random order once.
– shuffle repeat all : All tracks of the disc are
played repeatedly in random order.
– repeat : The current track is played repeatedly.
– repeat all : The entire disc is played repeatedly.
– shuffle album (with MP3-CDs only):
All tracks of the current album are played in random order once.
– shuffle repeat album (with MP3-CDs only):
All tracks of the current album are played repeatedly in random order.
– repeat album (with MP3-CDs only):
All tracks of the current album are played repeatedly.
Your selected mode is marked by , , above the playmodes,
album, shuffle, repeat all.
2 Playback starts in the selected mode after 2 seconds.
3 To return to normal playback, press MODE repeatedly until repeat and shuffle
disappear.
Storing the last position played-RESUME
You can store the last position played. When restarting, playback wil
continues from where you have stopped.
1 Switch the slider to RESUME during playback to activate resume .
y
appears above resume .
2 Press
9
whenever you want to stop playback.
3 Press
2;
to resume playback.
y
Playback continues from where you have stopped.
• To deactivate RESUME, switch the slider to OFF.
y
disappears from resume .
Locking all buttons-HOLD
You can lock all buttons of the set. When you press any key, no action will be
executed then.
• Switch the slider to HOLD to activate hold .
y
appears above resume and hold is displayed. All
buttons are locked. When pressing any key, Hold is displayed.
• To deactivate HOLD, switch the slider to OFF.
y
disappears from resume or hold.
FEATURES / ACCESSORIES
ESP and powersaving
With a conventional portable disc player the music
may stop while you are jogging for example. The
E LECTRONIC S KIP P ROTECTION protects this set
against loss of sound caused by light vibrations or
shocks. Continuous playback is ensured.
ESP does
not protect the set against damage caused by
dropping !
• Press ESP repeatedly during playback to select either:
y
is shown and ESP is switched on.
y
disappears. Powersaving is switched on.
Belt Clip
1 Align the belt clip as indicated in the illustration and press on the clip to insert its
shaped pin into the hole in the set.
2 Turn the clip clockwise as indicated to lock the belt clip to
the set.
• To detach, gently lift the belt clip at the indicated end and
turn it counter-clockwise.
In-car connections (supplied or optionally available)
Only use the AY 3545or AY 3548 car voltage converter (4.5 V DC, positive pole
to the centre pin) and the AY 3501 car cassette adapter. Any other product
may damage the set.
1 Put the set on a horizontal, vibration-free and
stable surface. Make sure it is in a safe place,
where the set is neither a danger nor an
obstacle to the driver and the passengers.
2 Plug the voltage converter into the
cigarette lighter socket
(only for 12 V car
battery, negative grounding) , then connect
the wired end with 4.5V DC input socket on the
set.
3 If necessary, clean the cigarette lighter socket to obtain a good electrical
contact.
4 Turn down the volume and connect the adapter cassette plug to LINE OUT/
p
on the set.
5 Carefully insert the adapter cassette into the car radio’s cassette compartment.
6 Make sure the cord does not hinder your driving.
7 Start playback on the set and adjust the sound with the car radio controls.
• Always remove the voltage converter from the cigarette lighter socket
when the set is not in use.
Note: If your car radio has a LINE IN socket, it is better to connect the set to this
jack instead of using the cassette adapter. Connect LINE OUT /
p
of the
set with the LINE IN jack of your car radio with an appropriate cable.
3:14
1
2
4.5V DC
12V DC
INSTRUTION FOR USE