11
Using your remote
1. Press and hold down the
SETUP
button on the remote until the red
light on the remote control turns on.
Release the
SETUP
button. The red
light will remain on.
2. Press and release the desired device
button (
TV, DVD, STR, AUD
) you
would like the code for.
3. Press and release the
ENTER
button.
4. Press and release the
#1
button.
Count the number of times the
remote light flashes. This is the
number corresponding to the first
digit of the code. Repeat the process
by pressing the
#2, #3
and
#4
buttons for the remaining digits.
5. Press and release the
ENTER
button
to exit this mode.
Code identification
Reset to factory
settings
1. Press and hold down the
SETUP
button on the remote until the red
light on the remote control turns on.
Release the
SETUP
button. The red
light will remain on.
2. Press and release the
MUTE
button.
3. Press and release the number
#0
button. The red indicator light will
flash twice.
SETUP
SETUP
ENTER
ENTER
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
0
SRP4229B_07 ENG Manual v2.indd 11
SRP4229B_07 ENG Manual v2.indd 11
9/2/21 5:03 PM
9/2/21 5:03 PM