Preparing for use
Attaching the brush head
C
1
Place the brush head onto the handle by sliding the ribs on the
inside of the nut into the grooves in the top of the handle.
C
2
Screw the brush head nut clockwise until it is firmly tightened.
If the brush head rattles during use, tighten the nut further.
3
Remove the travel cap from the brush head before you start
brushing.
C
4
Store excess cord by winding it round the cord storage hooks
in the bottom of the charger.
Charging
Charge the Sonicare for at least 24 hours during the first few days of
use.
We advise you to keep the Sonicare in the plugged-in charger when
not in use to maintain a full battery charge. When the battery is empty,
it takes at least 24 hours to fully charge the Sonicare.
C
1
To charge the Sonicare, place the handle properly in the
charger with the on/off button facing towards the front of the
charger.
Make sure the bottom of the handle sits back securely in the charger,
making complete contact.
C
◗
When the handle is placed incorrectly in the charger, the charging
light may still go on, but charging will not take place.
ENGLISH
5
Содержание ELITE e5000 series
Страница 1: ...elite e5000 the sonic toothbrush s e r i e s ...
Страница 2: ...2 I A H ...