Philips EasyClean, Руководство пользователя, Страница: 8 / 28

- The UV light bulb is hot during and immediately after the sanitising
cycle. Do not touch the UV light bulb when it is hot.
- Do not operate the sanitiser without the protective screen in place
to avoid contact with a hot bulb.
- If the sanitiser has been used for 3 consecutive UV clean cycles
(i.e. 3 times in a row), switch it off for at least 30 minutes before
ou start another UV clean cycle.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
General description (Fig. 1)
1 Hygienic travel cap
2 Brush head
3 Battery charge indicator
4 Power on/off button
5 Handle
6 Charger (specific types only)
7 UV sanitiser base with integrated charger and cord wrap
(specific types only)
- Not shown: UV light bulb
- Not shown: Sanitiser drip tray
- Not shown: Protective screen for UV light bulb
Note: The contents of the box vary based on the type purchased.
Preparing for use
Attaching the brush head
1 Align the front of the brush head with the front of the toothbrush
handle.
2 Push the brush head onto the metal shaft (Fig. 2).
Note: There is a small gap between the brush head and the handle.
ENGLISH
8