
E
n
g
li
sh
1
Basic Connections
Audio
(red/white cables)
Video
(yellow cable)
Step 1: Connecting to
television
This connection enables you to view the
video playback from this unit.
You only need to choose
one
of the
options below to make the video
connection.
– For a standard TV, follow option 1.
– For a progressive scan TV, follow
option .
– For a HDMI TV, follow option .
Option 1: Using Composite Video
jacks (CVBS)
You can connect this unit to a TV
through the composite video cable which
provides good picture quality.
l
Connect the audio/video cables (supplied)
from the
TV OUT
and
AUDIO OUT
FRONT L/R
jacks on this unit to the
video input jack (yellow) and audio input
jacks (red/white) on your TV.
TV
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
Option 2: Using Component Video
jacks (Y Pb Pr)
You can connect this unit to a TV
through the component video cables
which provides superior picture quality.
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required.
A
Connect the component video cables
(red/blue/green - not supplied) from the
Y Pb Pr
jacks on this unit to the
corresponding component video input
jacks (or labeled as Y Pb/Cb Pr/Cr or
YUV) on your TV.
B
Connect the audio/video cable (red/white
- supplied) from the
AUDIO OUT
FRONT L/R
jacks on this unit to the
audio input jacks (red/white) on your TV.
Leave the yellow video cable
disconnected.
C
Proceed to ‘Getting Started - Setting up
Progressive Scan feature’ for detailed
progressive feature setup.
Video
Audio
TV
AUDIO
IN
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
2
1
dvp5286K_98_eng.indd 13
2008-04-09 10:28:52 AM