Philips DVP520, Руководство пользователя, Страница: 14 / 34

05_8239 210 98882
14
Getting Started
1
Press SYSTEM MENU .
2
Press
1 2
to select ‘Video Setup Page’.
3
Use the
1 2 3 4
keys on the Remote
Control to navigate in the menu.
Move to ‘TV Type’ and press
2
.
PAL
– Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC
– Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc and output in NTSC
format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
4
Select an item and press
OK
.
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
- - Video Setup Page - -
Set TV Standard
TV Type PAL
TV Display NTSC
Closed Captions Multi
Angle Mark
Smart Picture
Picture Setting
Helpful Hint:
–
Before changing the current TV
Type setting, ensure that your TV
supports the ‘selected TV Type’ system.
–
Follow the instructions that
appears on the TV screen.
–
If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
HINTS:(refer to the owner's manual
Changing to (selected TV Type)
1. Ensure your TV supports it.
2. If there is a blank screen on normal TV,
wait 15 seconds for auto recover
< > - Move OK - Select
Cancel
OK
Confirm again to use (selected TV Type)
If picture is good press OK on remote
TO GO BACK TO (Current TV Type):
1. Open tray
2. Press '3' Key
< > - Move OK - Select
Cancel
OK
To exit from the menu
Press SYSTEM MENU or select ‘Exit
Setup Menu’ and then press OK .
01-32 DVP520_051 19/03/2004, 11:48 AM 14