Philips DVP3882, Руководство пользователя, Страница: 18 / 30

18 EN
Setup
Audio setup
General
Analogue Output
Digital Audio
HDMI Audio
Audio Sync
Volume
Sound Mode
Video
Audio
Preference
Stereo
Off Night Mode
On
[Analogue Output] - Adjust this setting for audio output through AUDIO OUT L/R .
• [Stereo] - Compress multi-channel Dolby digital sound to stereophonic sound.
• [LT/RT] - Compress multi-channel Dolby digital sound to 2-channel surround sound.
[Digital Audio] - Adjust this setting for audio output through COAXIAL/DIGITAL OUT .
• [Digital Output] - Select a type of digital output.
• [Off] - Disable digital output.
• [All] - Support multi-channel audio formats.
• [PCM Only] - Downmix to two-channel audio signal.
• [LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
Note
• [LPCM Output] setting is changeable only when [Digital Output] is set as [PCM Only] .
The higher the sampling rate, the better the sound quality.
•
[HDMI Audio] - Enable or disable the audio output through HDMI cable.
[Audio Sync] - Set a delay time for audio output when you play a video disc.
[Volume] - Set the default volume level.
[Sound Mode] - Select a preset sound effect.
[Night Mode] - Equalize loud sound and soft sound. Enable this feature to watch DVD movies at a
low volume at night.
Note
Applicable to Dolby Digital encoded DVD discs only. •