Philips DVP3236/94, Руководство по обслуживанию

Страница: 21 / 55

MODE FOR SERVICE
1. SERVICE MODE
Purpose:
The service mode is used to assist the service department in troubleshooting the
various parts of sets brought in for servicing by customers.
1.1 Entering the Service Mode:
Press 2, 5, 8 when the tray is opened, the player will enter this mode.
The LED will display "SS01" and close the tray.
SS01: static message until key pressed.
S: refers to Service Mode.
S: refers to Version.
xx: refers to Software version number of main uP (ZORAN 966D). Counting
up from 01 to 99. E.g.: “SS01” shows that main uP uses version 01.
Two Test modes:
Each test is entered by pressing the corresponding key.
1.2 TEST LED
A, Press RC PLAY key to enter LED test mode (test pattern 1), and the LED will
display "88888".
B, Press RC PLAY key again, will enter display test pattern 2. The LED will display
"55555".
C, Then press RC STOP key will exit the display test pattern. The LED will display
"SS01".
1.3 TEST FRONT PANEL KEY
A. Press RC EJECT key to enter key test to test the FP key, the LED will
display "HE41"
。
Then press FP POWER key, the LED will display "HE42",
Then press FP EJECT key, the LED will display "HE43",
Then press FP PLAY key, the LED will display "HE44",
Then press FP STOP key, the LED will display "STOP",
Panel/remote key key Led display
Remote key Eject open/close HE41 (Enter panel key test
mode)
Front panel Power HE42
Front panel Eject HE43
Front panel Play HE44
Page 19 of 51