DVP3005&3000/69_1
English
8
AUDIO IN
R L
VIDEO
IN
TO TV
INT IN
CH3 CH4
2
1
Connections
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1
Use the composite video cable (yellow) to
connect the DVD Player’s
CVBS
jack to
the video input jack on the RF modulator.
2
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV’s
RF jack.
RF coaxial cable to TV
Back of RF Modulator
(example only)
Antenna or
Cable TV signal
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded,
press
STANDBY ON on the DVD Player
front panel,
“
NO DISC
” may appear on the
display panel.
Connecting the power cord
NO DISC
~ AC MAINS
AUDIO
OUT
V (Pr/Cr)
U (Pb/Cb)
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
01-31 DVP3005_Eng_692
14/03/05, 11:02 AM
8