manualshive.com logo in svg

Philips DVP 721VR, Руководство по обслуживанию, Страница: 90 / 119

Поделиться
Скачать
Philips DVP 721VR Скачать руководство пользователя страница 90

Purpose of Measuring : To measure and check the reel torque on the take-up part and the

supply part that performs basic operation of the VCR (VCP) for
smoothly forwarding the tape. 
Measure and check followings when the tape is not smoothly
wound or the tape velocity is abnormally proceeded:

4-14

• Torque Gauge 

(600 g.cm ATG)

• Torque Gauge Adaptor
• Cassette Torque Meter 

SRK-VHT-303

• Play (FF) or Review

(REW) Mode

• Try to operate the VCR (VCP) per mode with the

tape not inserted (See ‘2. Prior Preparation for
Deck Adjustment).

• Measure after adhering and fixing the torque

gauge adaptor to the torque gauge (Fig. C-3-1)

• Read scale of the supply or take-up part of the

cassette torque meter (Fig. C-3-2).

DECK MECHANISM ADJUSTMENT

1) Take the power cord from the consent.
2) Separate the top cover and the plate assembly top.
3) Insert the power cord into again.
4) Turn the VCR (VCP) on and load the cassette while push-

ing the lever stopper of the holder assembly CST back-
ward. In this case, clog both holes on the housing 
rail part of chassis to prevent detection of the end sensor.

If doing so, proceeding to the stop mode is done. In this
status, input signals of all modes can be received.
However, operation of the Rewind and the Review is
impossible since the take-up reel remains at stop status
and so cannot detect the reel pulse (however, possible for
several seconds).

2. Previous Preparation for Deck Adjustment

(Preparation to load the VCR (VCP) with cassette tape not inserted)

3. Torque Measuring 

NOTE

Adhere the torque gauge adaptor to the torque gauge for measuring the value. 

SRK

VIDEO

CASSETTE

TORQUE

METER

VHT-303

S

R

K

- V

H T

- S

SR

K - V H T - T

300

250

200

150

50

0

300

250

200

150

50

0

100

Fig. C-3-2

Fig. C-3-1

Torque Gauge

Torque Gauge
Adaptor

Reel Table

Item

Fast forward Torque

Rewind Torque

Play Take-Up Torque

Review Torque

Fast Forward

Rewind

Play

Review

Torque Gauge

Torque Gauge

VHT-303

VHT-303

Take-Up Reel

Supply Reel

Take-Up Reel

Supply Reel

More than 400g°cm 

More than 400g°cm

40~100g°cm

120~210g°cm

Mode

Instruments

Reel Measured

Measuring Value

• Cassette Torque Meter (SRK-VHT-303)

• Torque Gauge (600g.cm ATG)

VCR (VCP) status

Measuring method

Fixtures and tools used

Содержание DVP 721VR
























































































































Отзывы:

Нет отзывов