13
Connecting with a scart cable and 'Easy
Link'
Your DVD recorder can exchange information with your TV set using 'Easy Link'. Your TV
channels can also be transferred in the same order from your TV set to your DVD recorder
using 'Easy Link'.
Please see your TV's operating instructions.
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), a special scart cable (3, suitable for
Easylink).
1
Switch off your TV set.
2
Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA IN
socket at the back of the DVD recorder.
3
Insert one end of the supplied aerial cable into the
TV OUT
socket at
the back of the DVD recorder and the other end into the aerial input
socket at the back of the TV set.
4
Plug in a special scart cable (for Easylink) into the scart socket
EXT 1
TO TV-I/O
at the back of the DVD recorder and the corresponding
scart socket at the back of the TV set (see TV set operating
instructions).
5
Switch on the TV set.
6
Insert one end of the supplied mains cable into the mains socket
4
MAINS
at the back of the DVD recorder and the other end into
the wall socket.
EasyLink
loading data from TV;
please wait
7
A message appears on the screen announcing that the transfer has
started. '
EASYLINK
' appears on the display during transfer.
The TV set transfers all saved TV channels, in the same order, to the
DVD recorder.
This may take several minutes.
ENGLISH
Connecting the DVD recorder
