Philips DVDR1000/001, Руководство пользователя

Страница: 29 / 56

English
RECORDING 31
When all timer blocks are full, the options timer
programming and G-
CODE
programming cannot be
accessed. For clearing a timer block, see ‘How to clear a
timer block’.
Timer programming with the G-
CODE
®
system
A G-
CODE
programming number is a number of up to
nine digits, printed in most TV guides next to the start
time of a TV programme.
All the information required for a programming is
contained encoded in the G-
CODE
programming number.
l Press TIMER on the remote control.
l Select ‘
G
-
CODE
programming
’ with
v
(up cursor) or
w
(down cursor).
l Press
u
(right cursor).
l Enter the entire G-
CODE
programming number (up
to nine digits) printed in your TV guide next to the
start time of a TV programme. If you made a
mistake, you can correct it with
CLEAR .
l Confirm with OK .
l If the G-
CODE
system does not recognize the TV
channel, the message ‘
Please enter programme
number
’ will appear on screen. Select the required
programme number (programme name) with
t u
(left right cursor) or the digit keys 0-9 and confirm
with OK .
‰ The data will appear on the TV screen.
l Use SELECT to select the programming key at
daily or weekly intervals. Mo-Fr: Recording at daily
intervals from Mondays to Fridays inclusive. Weekly:
Recording at weekly intervals on the same day of
the week.
l Press
u
(right cursor).
l Use SELECT to switch VPS/PDC on or off.
‰ When VPS/PDC is switched on, the start time is
marked with an asterisk.
l Press
u
(right cursor).
l Use SELECT to select the recording mode (
HQ
,
SP
,
LP
,
EP
).
T i m e r
G
-
C o d e p r o g r a m m i n g
P l e a s e e n t e r
p r o g r a m m e n u m b e r
T i m e r
M o
-
F r
/
W e e k l y
P r e s s S E L E C T
T o s t o r e
P r e s s O K
G
-
C o d e p r o g r a m m i n g
G
-
C o d e n u m b e r
T i m e r
T o e x i t
P r e s s T I M E R
G
-
C o d e p r o g r a m m i n g
T i m e r p r o g r a m m i n g
T i m e r l i s t
What is ’VPS’/‘PDC’?
With ’VPS/PDC’, the TV station controls the
beginning and the length of the programmed
recording. This means that the video recorder
switches itself on and off at the right time even if a
TV programme you have programmed begins earlier
or finishes later than expected.
Usually the start time is the same as the VPS/PDC
time. If, however, in the TV guide, in addition to a TV
programmes start time, a different VPS/PDC time is
given, e.g.: ’20.15 (VPS 20.14)’, you must enter ’20.14’
as the start time exactly to the minute. If you want
to enter a time that differs from the VPS/PDC time,
you must switch off ’VPS/PDC’.
01DVD+R1000UMAZGB24411F1 24-01-2002 18:01 Pagina 31