Speaker Settings 49
Allows you to select speaker settings, volume balance and
delay time and to test the speaker settings.
Speaker settings are only active on the Analog Multi-Channel
Output.
1
Press SYSTEM MENU. will be selected.
2
Press
9
repeatedly to select
G
, then press
:
.
3
Press
9
repeatedly to select Speakers, then press
:
.
4
Press
8
or
9
to select the speaker you want to adjust.
Select Front L & R (left and right), Center, Surround L (left),
Surround R (right), or Sub Woofer. Your audio system may refer to
the Surround speakers as the rear speakers.
5
After selecting the speaker, press
:
. Then, press
8
or
9
to
adjust the sound of the speaker.
Press OK to go back and select another speaker. Repeat
steps 4-5 as often as necessary until you are satisfied with
the speaker settings.
6
Press SYSTEM MENU to remove the menus.
Speakers
Front L & R
Center
Surround L
Surround R
Sub Woofer
OK to exit 0dB L 0dB
Z
Y
d
1en
1en 1 st
s
s
1,6
2-5
• The Dolby Digital licensing
agreement does not prohibit
any particular speaker settings.
Instead, it gives guidelines for
possible speaker settings.
Helpful Hint