Philips DVD757VR /00, Руководство по обслуживанию

Страница: 17 / 123

1-6-2 H9520SNA
DVD-R-OUT
DVD Component Video Signal
(red)
DVD-VIDEO DVD Video Control Signal
END-S Tape End Position Detect Signal
FE-H GND Ground for Full Erase Head
FF/REW-L
Frequency Characteristics
Switching Signal (FF/REW=”L”)
FIL-ON/OFF Filament ON/OFF Control Signal
FP-CLK Clock Input
FP-DIN Serial Data Input
FP-DOUT Serial Data Output
FP-STB
Serial Interface Strobe
FSC-IN
[4.43MHz]
4.43MHz Clock Input
FTV-IN
Comparator Input of Video Signal
for Follow TV
H-A-COMP Head Amp Comparator Signal
H-A-SW Video Head Amp Switching Pulse
Hi-Fi-A Hi-Fi Audio Head
Hi-Fi-COM Hi-Fi Audio Head Common
Hi-Fi-H-SW Hi-Fi Audio Head Switching Pulse
IIC-BUS- SCL IIC BUS Control Clock
IIC-BUS- SDA IIC BUS Control Data
INPUT
SELECT Input Selector
Control Signal
JK1-8P-OUT
SCART 8Pin Output Control
Signal
K1 Key Data 1 Input
K2 Key Data 2 Input
KEY-1 Key Scan Input Signal 1
KEY-2 Key Scan Input Signal 2
LD-SW
Deck Mode Position Detector
Signal
LD-SW
Deck Mode Position Detector
Signal
LINE MUTE Audio Mute Control Signal
LINE- MUTE
Audio Mute Control
Signal
LM-FWD/REV Loading Motor Control Signal
MOD-A Modulator Audio Output Signal
MOD-V Modulator Video Output Signal
N-A-PB Normal Audio Playback
Signal Name Function
N-A-REC Normal Audio Recording
OSC Oscillator Input
OSCin
Clock Input
for letter size
OSCout Clock Output for letter size
OSD-V-IN OSD Video Signal Input
OSD-V-OUT OSD Video Signal Output
OSDVss OSDVss
OUTPUT-
SELECT
Output Select
P-DOWN-L
Power Voltage Down Detector
Signal
P-OFF-H Power Off at High
P-ON+15V +15V at Power-On Signal
P-ON+44V +44V at Power-On Signal
P-ON+5V +5V at Power-On Signal
P-ON-H Power On Signal at High
PB-H-OUT Playback Signal Output at High
PG-Delay
Video Head Switching Pulse
Signal Adjusted
Voltage
POW-SAF
P-ON Power Detection Input
Signal
POWER-LED “POWER” LED Signal Output
REC-LED “REC” LED Signal Output
REC-SAF-SW
Recording Safety SW Detect (With
Record tab=”L”/ With out Record
tab=”H”)
REMOTE-
VIDEO Remote
Control Sensor
RESET
System Reset
Signal (Reset=”L”)
RF-SW Video Head Switching Pulse
S-REEL Supply Reel Rotation Signal
SC2-IN Input Signal from Pin 8 of SCART2
SECAM-C-IN SECAM Chroma Signal Input
SECAM-FM-
OUT
SECAM FM Signal Output
SECAM-H SECAM Mode at High
ST-S
Tape Start Position Detector
Signal
T-REEL
Take Up Reel
Rotation Signal
TIMER LED “TIMER” LED Signal Output
Signal Name Function