10
EN
3 Get started
Caution
•
Use of controls, or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this device. The
model number and serial number are on the
back of the device. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speaker cables
Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
•
For optimal sound, use the supplied speakers only.
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3
Screw the left red (+) connector to secure
the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
2
1
3
