Philips DSR 2015, Руководство пользователя

Страница: 50 / 68

INSTALLATION / FACTORY SETTING
After entering the following number combination in the "change PIN" menu, you can reset
changes to the unit settings and restore your unit to its delivery condition (factory setting).
To do this select the "change PIN" menu Key M > Channels > Minor Protection > PIN
1. Enter the current PIN: X X X X X = the PIN changed by you
or: 0 0 0 0 0 = delivery condition
2. Enter the following PIN: 1 1 1 1 1
3. Enter the following PIN: 9 9 9 9 9
All unit settings are reset to the default factory settings:
PIN (protection code): . . . . . . . . . . 0 0 0 0 0
Time offset: . . . . . . . . . . . . . . . . +1h or +2h , according to date of manufacture
Menu language: . . . . . . . . . . . . . . . German
Signal paths: TV SCART . . . . . . . . RGB
VCR Scart . . . . . . . . CVBS
TV -> VCR . . . . . . . . ON
VCR signal . . . . . . . RGB/CVBS
Picture format . . . . . 4 : 3
VCR record . . . . . . . Standard
Digital audio . . . . . . . Standard
LNB LNB . . . . . . . . . . . . . ON
In standby . . . . . . . . OFF
DiSEqC 22kHz signal . . . . . . High/Low
Tone burst . . . . . . . . OFF
DiSEqC . . . . . . . . . . ON
DiSEqC repeat . . . . . OFF
Satellites: Enabling ASTRA . . . ON
Enabling HOTBIRD . ON
LO1 . . . . . . . . . . . . . 9750 MHz
LO2 . . . . . . . . . . . . . 10600 MHz
Orbit pos. ASTRA . . . 1
Orbit pos. HOTBIRD . 2
Uncom. switch . . . . . OFF
Names of the favourite lists . . . . . . according to delivery condition
N.B.: Check that the time offset is correct and change the menu language as required.
Please note that any changed PIN is also set to 00000.
4.1 CHANNELS
4.1.1 Favourite list
Call up the main menu using the M key and then press the OK key twice.
Sorting, swapping, copying and deleting channels - in one single menu!
"