Philips DS9830W, Руководство пользователя

Страница: 17 / 30

15
EN
Tip
•
If Philips_Install XXXXXX is not in the list, try to scan
the available Wi-Fi networks again.
Open the built-in web page of
DS9830W
1
Launch Apple Safari browser or any other
Internet browser on your Wi-Fi enabled
device.
2
Type in
192.168.1.1
at the browser
address bar and confirm.
» The DS9830W configuration web
page is displayed.
Configure the internal Wi-Fi settings
of DS9830W
On the DS9830W configuration web page,
you can configure the internal Wi-Fi settings
of DS9830W for connection of DS9830W to
your existing home Wi-Fi network.
192.168.1.1
Philips SoundSphere XXXXXX
Note
•
Make sure that the settings on the configuration web
page match your home Wi-Fi network settings that you
wrote on paper.
• Follow the on-screen instructions to
configure and confirm the internal Wi-Fi
settings of DS9830W.
» After a while, the
WI-FI STATUS
indicator on the back of DS9830W
stops blinking and turns solid green,
and the unit beeps.
» DS9830W is connected to your
existing home Wi-Fi network
successfully.
Philips SoundSphere XXXXXX