2.2 TRIGGER
AND
FLASH
The Dica 220 has one optically isolated trigger input and
two optically isolated flash outputs. See chapter 6 for the
electrical details.
2005-06-27
Page
3
The trigger input enables the feature that an image capture
is started by a hardware signal (the trigger input).
The flash outputs can control an external flash unit if
required.
The trigger and flash connector at the backside of the
Dica 220 is a Hirose connector, type: HR10A-7R-6SB.
The counterpart (cable part) must be: HR10A-7P-6P.
Also check our website for available accessories that can
be used to connect the camera to your system.
4
5
6
3
2
1
Figure 2-3 Dica 220 Trigger/Flash connector
Pin
Function
1 Trigger
Ground
2
Trigger input
3 Flash
1
output
4 Flash
2
output
5 NC
6 Flash
24V
Dica 220 Trigger/Flash internals:
6) Flash 24V
3) Flash 1 output
4) Flash 2 output
Dica
400E
400E
1) Trigger Ground
2) Trigger input
Dica
940E
15V
