Page 14
2005-06-27
6 TECHNICAL
SPECIFICATION
Power requirements
+10..24V, 6.5 Watt (max)
Optics
C-mount
Mech. Dimensions
: 90 x 47 x 35 mm (l x w x h)
Sensor
Size 2/3”
CMOS
Number of pixels
1280 x 1024
ADC resolution
10 bits
Regions of interest
1
Exposure time
programmable up to 65535 µs.
Frame rate
Grabber-Mode: 4 frames per
second (at 100Mbs)
Embedded: 27 frames per
second
Electronic shutter
Rolling and synchronous
Gain programmable
0..10.69 dB
Sub-sampling
Factor of 2 horizontal and vertical
FPN:
< 0.5% pp
Inputs
Reset input:
24V +/- 10% active level.
Trigger input:
24V +/- 10% active level. Delay
and duration programmable.
Both 0..131070 µs, in steps of 2
µs.
Input current:
Typical 6 mA at 24V
Outputs
Flash output:
2x, 24V level +/- 10%. Delay,
duration programmable.
Both 0.. 65535 µs.
Level programmable.
Output current:
Typical 7 mA, Max. 10 mA.
RS-232 Interface
Handshake: None
Maximum Baudrate:
115200
Environmental
Dica 220 complies to:
EFT
immunity:
IEC1000-4-4
ESD immunity:
IEC1000-4-2 / EN50082-2
Emission
standard
EN50082-1
EMC:
EN55022 (not mandatory)
EN55011
EN61000-4-3 / EN61000-4-6
EDT
EN61000-4-2
CE:
Certified
Operating
Temperature:
10 oC to 45 oC
Relative humidity:
20% to 80%, non condensing
Non-operating
Temperature:
-20 oC to 70 oC
Relative humidity:
20% to 80%, non condensing
