Philips DD-A110GX, Руководство по обслуживанию

Страница: 17 / 35

4-6
Module Fail / Problem Remedy / Symptom
„
Can not see any display or color abnormal, video distortion. Make sure
cables connected correctly. Try another output like S-video, AV,
Component, and Scart.
Video Output
„
Run SETUP to select available video output
„
Can not hear any sound output through speakers of TV or amplifier.
Make sure cables connected correctly. Try another output like AV,
optical, coaxial
Audio Output
„
Playing DVD movie, when select DTS out on DVD audio menu no audio
output. User needs to run SETUP/Audio/DTS to set DTS ON
„
Run SETUP, Tuner setting correctly, but after scan TV channel can not
select correct TV programs. Run SETUP/ Tuner/TV signal, select Antenna
or Cable then run "Channel Scan" again, don't use "Auto". "Auto" will
re-arrange channel table and remove channel numbers not available.
TV Tuner
„
User selects TV signal/country correctly, after scan still cannot select
channel, this could be a bad TV tuner.
„
Connect external source like AV, S-video, Scart, DV-link (1394) can not
see the video input. Make sure cables connected correctly. If these
signals connect to other AV products no problem. This could be a bad
connector
External source
„
For DV, user need to know the DV is NTSC/PAL, and the playing DV
tape is NTSC/PAL. They must be the same TV type as the recorder to
make it works properly.
„
Show "Protected Content", it's Copy-Protected and not allowed to
copy
„
Show "Wrong Signal Type" when record to disc. The disc was formatted
by different TV system (NTSC/PAL). For DVD±RW, user can reformat this
disc (contents on this disc will be erased). For DVD±R, user can only
change another disc
Can not Real-time Record
„
Press "Record" shows key blocked, will not start recording.
Can not Timer Record
„
Open "Timer" record again, there is a message shows why it failed,
please move the cursor to column status and it will show the reason it
fails