Philips DCP851, Руководство по обслуживанию

Страница: 9 / 51

4.0 MECHANICAL INSTRUCTION
After done above, you can take out the IPOD
plastic docking cover and IPOD docking.
7. Unplug all the housing which are connected
with main board and TFT board (don’t forget to
unplug the Panel FFC from TFT board behind
the black
flannel)
.
8. Remove 6pcs screws on the TFT board,
de-
soldering the wire connected between panel and
TFT board (don’t forget to
de-soldering the black
ground wire
)
. Then take out the TFT board
from display frame.
Remove 4pcs screws which are to fix the panel on
the display frame to take out the panel from
display frame.
To take out the IPOD board.
Remove 2pcs black screws from the bottom of
IPOD
docking(as the photo shown)