Philips DCM3120, Руководство пользователя

Страница: 17 / 26

18 EN
3 A##B
radio
G#B##
Note
Make sure that you have connected and fully extended
the FM antenna.
Press HF*IOP repeatedly to switch the
source to .
2
Press and hold / until the frequency
starts to change.
»
blinks until the FM tuner tunes
to a station with strong reception.
*
frequency, press / repeatedly
until the desired frequency is displayed.
G%
In FM mode, you can press F repeatedly to switch
the sound setting between (stereo) and
(monophonic).
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
stations.
Press and hold +IF? until blinks.
»
All available stations are programmed in the
order of waveband reception strength.
»
*
broadcast automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
To overwrite a programmed radio station, store
another one with its sequence number.
Tune to a radio station.
2
Press +IF? to activate programming.
»
ff (XX indicates the
sequence number) blinks.
Press / or / to allocate a
sequence number from 1 to 20 to this
radio station, and then press
+IF? to
»
The preset sequence number and
the frequency of this radio station are
displayed.
<
Repeat steps 1-3 to program more
stations.
G#%###
Press / or / to select the
sequence number of that preset radio
station.
Enter its sequence number with numeric
keypad.
DCM3120_12_UM_01_V2.1.indb 18 3/31/2012 10:01:20 AM