11
English
Turn on
Press .
»
The unit switches to the last selected
source.
Note
&
To select a source, press
SOURCE
repeatedly or the
source selection buttons on the remote control.
Switch to standby mode
Press again to switch the unit to standby
mode.
»
) + ;
panel.
2
Press and hold
for 3 seconds to start
full scan.
»
The unit automatically stores FM radio
# * *
!
station.
Tip
&
To exit storing mode, press or .
Set clock
1
In standby mode, press and hold
CLOCK
SET
on the remote control for two
seconds.
»
[SET CLOCK]
) +
the display.
2
Press
CLOCK SET
again.
»
The 12/24 hour format blinks.
3
Press /
repeatedly to select hour
format.
4
Press
CLOCK SET
'
»
The hour digits blink.
5
Repeat steps 3-4 to set the hour.
6
Repeat steps 3-4 to set the minute.
7
Repeat steps 3-4 to select whether to
synchronize time of this unit with RDS
stations.
&
[RDS TIME SYNC [N]
]
: time
synchronization is deactivated.
&
[RDS TIME SYNC [Y]
]:
the unit
synchronizes time from the RDS
stations automatically.
Note
&
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
&
If no button is pressed in 90 seconds, the unit exits
clock setting mode automatically.
EN
